This is an old revision of the document!

piCorePlayer 9.0.1

Download piCorePlayer v9.0.1 32 Bit which will work on a Rasberry Pi v1
Burn the image to a SD card, 4GB is more than sufficient
The built in audio ouput will work out of the box
To use a DragonFly USB audio device:
1. Open the settings page by navigating to the player's IP address in your browser
2. In Squeezelite Settings set Audio output device settings to USB audio and save
3. In Change Squeezelite settings set Output setting to hw:CARD=DragonFly,DEV=0

Know How