Bernard's Wiki - deb10

alsa

Anonymous (anonymous@undisclosed.example.com) — 2021-04-03T08:23:34+00:00

Sound System * Recording S/PDIF (SPDIF) under Linux * [SOLVED] How to enable 5.1 channel audio via IEC958 * KXStudio : Repositories * How use PulseAudio and JACK? * KXStudio * Starting jackd at startup * Question about Capturing Audio from TOSLINK * Capture 5.1 DD with spdif input * The Inconvenient Truth about SPDIF Input! * Enable ALSA to capture audio from CS4207's SPDIF input * Download hda-analyzer * Routing audio jacks with HDAAnalyzer * HDA Analyzer

backuppc

Anonymous (anonymous@undisclosed.example.com) — 2024-04-29T05:38:48+00:00

BackupPC This guide is written when installing BackupPC V4.3.2. It covers installation, migration of V3 backup data, and host setup. Since Debian 10 includes BackupPC V3.3, this guide covers installation from tarball rather than by using the packet manager. Find the

install

Anonymous (anonymous@undisclosed.example.com) — 2020-01-19T00:21:11+00:00

Installation AMD Display Drivers XFCE desktop will boot, but the screen resolution is off, and the fonts are hardly readable. LXQt desktop will not boot, the machine drops into a terminal during boot. For both szenarios it is necessary to first install the AMD Display Drivers. Use your favorite text editor to open /etc/apt/sources.list.

ixion

Anonymous (anonymous@undisclosed.example.com) — 2023-01-18T14:09:16+00:00

Backup Server - Debian Buster 10.3 Ixion * Installation * SSH Client and Server * RAID - mdadm (Software RAID) * LVM - Logical Volume Manager * LUKS - Disk Encryption * Encrypted partitions/folders with auto-mount * BackupPC * Samba File Server * NUT Client - Network UPS Tools * Services - rc.local * Zabbix

lxqt

Anonymous (anonymous@undisclosed.example.com) — 2020-03-07T11:24:16+00:00

LXQt Display Manager * Check Locale, note that within LXQt you can set locales in the GUI which do not (yet) have a translation and will cause error messages. You might want to modify LC_TIME, LC_PAPER, and LC_MEASUREMENT to a different locale than the default locale, and verify the following files are set correctly

osiris

Anonymous (anonymous@undisclosed.example.com) — 2019-11-27T12:38:57+00:00

Virtual Backup Server - Debian Buster 10.2.0 (Osiris) * V7.2: XFCE display manager * BackupPC * V7.2: Samba File Server * V7.2: Access to samba shares and windows computers * V7.2: AutoFS * V7.2: Nagios * V7.2: Network UPS Tools (NUT) Client * V7.2: Gemini Nagios * V7.2: SSH Client and Server * V7.2: NTP - date and time

postfix

Anonymous (anonymous@undisclosed.example.com) — 2021-05-01T08:02:07+00:00

Postfix (mail) * "(CRON) info (No MTA installed, discarding output)" error in the syslog

raspi

Anonymous (anonymous@undisclosed.example.com) — 2026-03-02T07:44:21+00:00

Raspian 10 (buster) Prepare SD card * Download and install the Raspberry Pi Imager * Copy “RaspBerryPi OS Lite” to the SD card Install OS * Boot from SD card * Update all packages * Enable SSH server in Interface Options and set location and keyboard in

rclocal

Anonymous (anonymous@undisclosed.example.com) — 2023-04-20T16:35:28+00:00

Services - rc.local * This section describes how to create a service file. As an example we use the re-creation of rc.local in Debian 10: sudo vim /etc/systemd/system/rc-local.service [Unit] Description=/etc/rc.local Compatibility ConditionPathExists=/etc/rc.local ConditionFileIsExecutable=/etc/rc.local After=network.target [Service] Type=forking ExecStart=/etc/rc.local start TimeoutSec=0 StandardOutput=tty RemainAfterExit=yes GuessMainPID=no SysVStartPriority=99 [Install] WantedBy=multi…

services

Anonymous (anonymous@undisclosed.example.com) — 2025-09-25T04:18:17+00:00

Services Auto-start and Auto-shutdown * Services - systemd * Services - rc.local * VirtualBox - Autostart and Autostop * Tar (when run from /home): tar -czvf archive.tar.gz --preserve-permissions --exclude='user/subsubdir/*' directory_or_file * Untar: tar -xvf archive.tar.gz Links * How To Use Systemctl to Manage Systemd Services and Units * How to run commands at shutdown on Linux * How to Prevent Accidental Shutdown or Reboot on Linux Using systemd Custom Service * syst…

systemd

Anonymous (anonymous@undisclosed.example.com) — 2020-06-23T11:41:24+00:00

Services - systemd * How To Use Systemctl to Manage Systemd Services and Units * How to run script with systemd right before shutdown in Linux

tools

Anonymous (anonymous@undisclosed.example.com) — 2022-01-22T07:00:14+00:00

Tools btop++ * Download btop++ * Unpack tar -xjf btop-x86_64-linux-musl.tbz * Install ./install.sh

tuning

Anonymous (anonymous@undisclosed.example.com) — 2021-12-15T10:50:04+00:00

Tuning Network Test performance * Install iperf on client and host machine sudo apt install iperf3 iotop * Open firewall on host ufw allow 5201 * Test network from client to host iperf3 -s # on host iperf3 -c # on client * Test disk access

vnc

Anonymous (anonymous@undisclosed.example.com) — 2025-08-04T07:59:27+00:00

VNC * VNC Server unter Debian 12 installieren Installation * Install TightVNC: $ sudo apt install tightvncserver * Open the ports in your UFW Firewall: $ sudo ufw allow VNC $ sudo ufw allow 5902/tcp * Establish a port forward for port 5902 for your client's SSH connection, and open an SSH connection to the server

x11

Anonymous (anonymous@undisclosed.example.com) — 2022-12-02T08:37:36+00:00

X11 * All my recent installs have X11 work properly, as long as nVidia or AMD display driver firmware is installed. To do this, read Installation. * Access to Snap applications via VNC requires tweaking permissions to access the X server. Links Some interesting links regarding X11 and remote access.

zabbix

Anonymous (anonymous@undisclosed.example.com) — 2020-06-23T12:36:16+00:00

Zabbix This guide is written when installing Zabbix V5.0.1. Terminology: Host and Client are equivalent, Server and Zabbix server are equivalent. Repository * Install Zabbix repository # wget https://repo.zabbix.com/zabbix/5.0/debian/pool/main/z/zabbix-release/zabbix-release_5.0-1+buster_all.deb # dpkg -i zabbix-release_5.0-1+buster_all.deb # apt update